MetroPave Plus


The Naylor MetroPave plus grid is made from 100% recycled plastic, is designed to withstand higher and more regular loading compared to the standard MetroPave. The MetroPave Plus grid is intended for use in commercial car parks, and car access roads. It can withstand occasional HGVs loadings for emergency access. Units can be infilled with grass or gravel to suit the local environment and are fully SuDs compliant.

Suitable for:

  • Garden paths
  • Shed bases
  • Domestic parking
  • Pedestrian walkways
  • Bridleways
  • Equestrian
  • Verge reinforcement
  • Bank stabilisation
  • Commercial car parks
  • Overflow car parks
  • Park & ride schemes
  • Access roads
  • Slopes and Pinning

MetroPave grids can be laid on slopes of up to 15 degrees without additional pinning or staking. Where the grid is used on the underside of a bridge abutment (e.g. to comply with the HSE recommended limits) every unit should be staked, and the sand bed stabilised with a 12:1 cement mix on the 40 – 45 degree slope. Pinning the grids to stop lateral movement on slopes can be easily done with a U Shaped pin through the recessed central grid on the MetroPave and on any of the recessed walls running across the centre of the MetroPave Plus grid. Edges can be pinned using a U pin over the extend interlock to secure the outermost edge.

Additional Information